Hollow shell ~150 mm tall, tapers 70 mm base → 50 mm mouth, hex cross-section twisting 120°, 2 mm wall, closed bottom.
Nine hexagonal sections are lofted from base to mouth; each one is scaled for the taper and turned for the twist. The vase is hollowed by subtracting a second loft whose flats sit one wall further in. That loft starts one wall above z = 0, which leaves the closed floor. Look at the faces as the vase turns: they spiral instead of staying flat. The open mouth shows the even 2 mm wall. The 70 mm and 50 mm are across-corner widths. Every dimension (height, baseDia, mouthDia, twistDeg, wall) is a param() that feeds the geometry through ParamRef arithmetic, so a slider change rebuilds the shape. Checked with kernelcad evaluate (clean) and the seven-view kernelcad render --sheet. Source: twisted-hex-vase.kcad.ts.