Releases: iNavFlight/inav-configurator
INAV Configurator 2.4.0 RC1
This version of INAV Configurator is intended to be used only with INAV firmware 2.4 families. INAV 2.3 is supported on a basic level, INAV 2.2 is not supported at all
 |
INAV Official on Telegram |
 |
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
 |
Support us on Banggood |
Important notes
- always read README.md
- users are advised not to use Chrome App! Chrome Apps are deprecated and are in a process of being removed from Chrome
- MacOS app will be released later!
Changes from the previous release
- Support for DJI FPV System configuration
- IDLE throttle and motor_poles in Outputs tab
- Rover and Boat platforms can now be selected in Mixer tab. Support on firmware side is still limited!
- ZOHD Dart 250g preset
- Mixer tab improvements
- bugfixes
Recommended hardware
Flight controllers
- Matek F722-SE
- Matel F722-WPS
- Matek F411-WSE
- Matek F765-WING
- Matek F722-MiniSE
- Holybro Kakute F7
- iFlight SucceX-E F4 Stack
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
2.3.3
This version of INAV Configurator is intended to be used only with INAV firmware 2.3 families. INAV 2.2 is supported on a basic level, INAV 2.1 is not supported at all
|
INAV Official on Telegram |
|
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
|
Support us on Banggood |
Important notes
- always read README.md
- Chrome App support is right now limited. Maps and mission planner are known not to work
Changes from the previous release
- Output and Configuration tabs improvements
- Redesigned PID Tuning tab
- Support for INAV 2.3 functions:
- Antigravity
- Dynamic gyro filters
- ESC telemetry
- Servos and Motors tab combined into single Outputs tab
- Real time monitoring for Mission Control
- CLI tab improvements
Recommended hardware
Flight controllers
- Matek F722-SE
- Matel F722-WPS
- Matek F411-WSE
- Matek F765-WING
- Matek F722-MiniSE
- Holybro Kakute F7
- iFlight SucceX-E F4 Stack
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 2.3.2
This version of INAV Configurator is intended to be used only with INAV firmware 2.3 families. INAV 2.2 is supported on a basic level, INAV 2.1 is not supported at all
|
INAV Official on Telegram |
|
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
|
Support us on Banggood |
Important notes
- always read README.md
- Chrome App support is right now limited. Maps and mission planner are known not to work
Changes from the previous release
- Support for INAV 2.3 functions:
- Antigravity
- Dynamic gyro filters
- ESC telemetry
- Servos and Motors tab combined into single Outputs tab
- Real time monitoring for Mission Control
- CLI tab improvements
Recommended hardware
Flight controllers
- Matek F722-SE
- Matel F722-WPS
- Matek F411-WSE
- Matek F765-WING
- Matek F722-MiniSE
- Holybro Kakute F7
- iFlight SucceX-E F4 Stack
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 2.3.1
This version of INAV Configurator is intended to be used only with INAV firmware 2.3 families. INAV 2.2 is supported on a basic level, INAV 2.1 is not supported at all
|
INAV Official on Telegram |
|
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
|
Support us on Banggood |
Important notes
- always read README.md
- Chrome App support is right now limited. Maps and mission planner are known not to work
Changes from the previous release
- Support for INAV 2.3 functions:
- Antigravity
- Dynamic gyro filters
- ESC telemetry
- Servos and Motors tab combined into single Outputs tab
- Real time monitoring for Mission Control
- CLI tab improvements
Recommended hardware
Flight controllers
- Matek F722-SE
- Matel F722-WPS
- Matek F411-WSE
- Matek F765-WING
- Matek F722-MiniSE
- Holybro Kakute F7
- iFlight SucceX-E F4 Stack
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 2.3
This version is not advised to be used as it contains a bug that can break settings restored via CLI
This version of INAV Configurator is intended to be used only with INAV firmware 2.3 families. INAV 2.2 is supported on a basic level, INAV 2.1 is not supported at all
|
INAV Official on Telegram |
|
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
|
Support us on Banggood |
Important notes
- always read README.md
- Chrome App support is right now limited. Maps and mission planner are known not to work
Changes from the previous release
- Support for INAV 2.3 functions:
- Antigravity
- Dynamic gyro filters
- ESC telemetry
- Servos and Motors tab combined into single Outputs tab
- Real time monitoring for Mission Control
- CLI tab improvements
Recommended hardware
Flight controllers
- Matek F722-SE
- Matel F722-WPS
- Matek F411-WSE
- Matek F765-WING
- Matek F722-MiniSE
- Holybro Kakute F7
- iFlight SucceX-E F4 Stack
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 2.3 RC3
This version of INAV Configurator is intended to be used only with INAV firmware 2.3 families. INAV 2.2 is supported on a basic level, INAV 2.1 is not supported at all
|
INAV Official on Telegram |
|
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
|
Support us on Banggood |
Important notes
- always read README.md
- Chrome App support is right now limited. Maps and mission planner are known not to work
Changes from the previous release
- Support for INAV 2.3 functions:
- Antigravity
- Dynamic gyro filters
- ESC telemetry
- Servos and Motors tab combined into single Outputs tab
- Real time monitoring for Mission Control
- CLI tab improvements
Recommended hardware
Flight controllers
- Matek F722-SE
- Matel F722-WPS
- Matek F411-WSE
- Matek F765-WING
- Matek F722-MiniSE
- Holybro Kakute F7
- iFlight SucceX-E F4 Stack
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 2.3 RC2
This version of INAV Configurator is intended to be used only with INAV firmware 2.3 families. INAV 2.2 is supported on a basic level, INAV 2.1 is not supported at all
INAV 2.3 RC1 firmware will be published in a few days
|
INAV Official on Telegram |
|
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
|
Support us on Banggood |
Important notes
- always read README.md
- Chrome App support is right now limited. Maps and mission planner are known not to work
Changes from the previous release
- Support for INAV 2.3 functions
- Servos and Motors tab combined into single Outputs tab
- Real time monitoring for Mission Control
- CLI tab improvements
Recommended hardware
Flight controllers
- Matek F722-SE
- Matel F722-WPS
- Matek F411-WSE
- Matek F765-WING
- Matek F722-MiniSE
- Holybro Kakute F7
- iFlight SucceX-E F4 Stack
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 2.3 RC1
This version of INAV Configurator is intended to be used only with INAV firmware 2.3 families. INAV 2.2 is supported on a basic level, INAV 2.1 is not supported at all
INAV 2.3 RC1 firmware will be published in a few days
|
INAV Official on Telegram |
|
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
|
Support us on Banggood |
Important notes
- always read README.md
- Chrome App support is right now limited. Maps and mission planner are known not to work
Changes from the previous release
- Support for INAV 2.3 functions
- Servos and Motors tab combined into single Outputs tab
- Real time monitoring for Mission Control
- CLI tab improvements
INAV Configurator 2.2.1
This version of INAV Configurator is intended to be used only with INAV firmware 2.2 families. INAV 2.1 is supported on a basic level, INAV 2.0 is not supported at all
|
INAV Official on Telegram |
|
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
|
Support us on Banggood |
Important notes
- always read README.md
- Chrome App support is right now limited. Maps and mission planner are known not to work
Changes from the previous release
- Improved DFU handling
- Improved font upload
- Fixed freeze when not supported firmware was connected
INAV Configurator 2.2.0
This version of INAV Configurator is intended to be used only with INAV firmware 2.2 families. INAV 2.1 is supported on a basic level, INAV 2.0 is not supported at all
|
INAV Official on Telegram |
|
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
|
Support us on Banggood |
Important notes
- always read README.md
- Chrome App support is right now limited. Maps and mission planner are known not to work
Changes from the previous release
- Support for new features developed for INAV 2.2. For a full list of changes, see INAV release notes
- Auto-Connect is removed
- Mission Control can be used without flight controller connected and load/save mission to file